INTRO by Black Rhodium All Intro Products INTROLINKS
INTROLINKS
The secret for success for installing INTROLINKS in your music system is to insert your loudspeaker cables into the TWEETER or HIGH FREQUENCY terminals of your loudspeaker.
This places your bass / mid-range speaker drivers in series with the large ferrite in the links.
This is more effective because the bass / mid-range speaker drivers handle about 90% of the energy from the amplifier. The large ferrite core under the heat shrink label will filter out a lot of distortion in your cable.
Your loudspeakers will sound much better if you connect them this way.
Construction
| Signal conductor | 0.75 sq.mm multistrand copper |
| Insulation | PVC |
| Noise rejection | Large ferrite core 45mm length |
| First end connectors | Gold plated plugs |
| Second end connectors | Gold plated 4mm 'Z' plugs |
| Polarity identification | Black and red connectors cover |
Dimensions
| Length | 280mm |
| Cable outer dimensions | 2.8mm x 5.6mm |
| Ferrite diameter | 12.5mm |
| Max. connector size |
Z plug 8.2mm Spade 14.3mm wide at end and 9mm diameter at termination |
| Weight | 50g |
| Temperature | -10°C to +50°C |
Electrical specifications
| Capacitance of cable | 10 pF |
| Characteristic Z at RF | 75 Ohm |
Connections
| Using loudspeaker cables with 4mm plugs |
Spade terminals to socket terminals for treble driver 4mm terminals to socket socket terminals for bass driver |
| Using loudspeaker cables with spades |
Spades to socket terminals for bass driver 4mm to socket terminals for treble driver |